How To Reset Whirlpool Washer –
Introduction
Whirlpool washers are popular for their efficiency and durability. However, like any other appliance, they can sometimes malfunction. When this happens, you may need to reset the washer to get it working again. In this article, we will discuss how to reset a Whirlpool washer.
Step-by-Step Guide
Step 1: Unplug the Washer
The first step in resetting a Whirlpool washer is to unplug it from the power outlet. This will ensure that there is no electricity flowing to the washer, making it safe to work on.
Step 2: Wait for a Few Minutes
After unplugging the washer, wait for a few minutes to allow the machine to cool down. This will also help to reset the electronic controls of the washer.
Step 3: Plug the Washer Back In
After waiting for a few minutes, plug the washer back into the power outlet. Make sure the outlet is functioning properly and can supply power to the washer.
Step 4: Select the Reset Option
Next, select the reset option on the washer’s control panel. This may vary depending on the model of your Whirlpool washer. Refer to the user manual for specific instructions on how to reset your washer.
Step 5: Run a Test Cycle
After selecting the reset option, run a test cycle to see if the washer is working properly. If the washer is still not functioning properly, you may need to troubleshoot the problem further or contact a professional for assistance.
Common Issues and Solutions
Issue 1: Washer Won’t Start
If your Whirlpool washer won’t start, there may be a problem with the door latch or the control panel. Try resetting the washer as described above and check if the door latch is functioning properly. If the problem persists, you may need to replace the control panel or contact a professional for assistance.
Issue 2: Washer Stops Mid-Cycle
If your washer stops mid-cycle, there may be an issue with the water supply or the drain pump. Check if the water supply is flowing properly and if the drain pump is clogged or damaged. You may also need to reset the washer to clear any error codes.
Issue 3: Washer Overfills or Underfills
If your Whirlpool washer overfills or underfills, there may be a problem with the water level sensor or the pressure switch. Try resetting the washer and checking if these components are functioning properly. If the problem persists, you may need to replace the faulty component or contact a professional for assistance.
Frequently Asked Questions
1. How often should I reset my Whirlpool washer?
You should only reset your Whirlpool washer when it is malfunctioning or displaying error codes. Resetting the washer too often may cause damage to the electronic controls.
2. Can I reset my Whirlpool washer by pressing a button?
Yes, most Whirlpool washers have a reset button on the control panel. Refer to the user manual for specific instructions on how to reset your washer.
3. Can I reset my Whirlpool washer without unplugging it?
No, you should always unplug your Whirlpool washer before resetting it. This will ensure your safety and prevent damage to the electronic controls.
4. How long should I wait before plugging my Whirlpool washer back in?
You should wait for at least 5 minutes before plugging your Whirlpool washer back in. This will allow the machine to cool down and reset the electronic controls.
5. What should I do if my Whirlpool washer is still not working after resetting it?
If your Whirlpool washer is still not working properly after resetting it, you may need to troubleshoot the problem further or contact a professional for assistance. It is important not to attempt any repairs yourself unless you are experienced in appliance repair.